Cheers...Mike wrote:Nice job particularly like the sink looking forward to the next installment
Since I won't be having any gas on board I thought I perform the simple task of removing the gas locker. It wouldn't budge so I ended having to cut it out with my trusty angle grinder, I've left the door in place for now but that will have to come out soon.
I also disconnected the Logic One PSU from the consumer unit and binned it as it only put out 11.5 volts / 5 amps and I'd read they are crap and have a habit of catching fire
I managed to get hold of some ali locker door frames yesterday and 4 locks, they are the old fashioned type but were cheap and big (5 foot by 1 foot) So it means I can get away with only one locker door per side. Out with the angle grinder and I managed to get the hole cut out without to much trouble, the curves in the corners were a bit more tricky but I used a serious of straight lines to follow the curve as best I could. I then used a grinding disk to curve them and a file.
After cutting out one I'd had enough for the day and I think my neighbours had to.
