Page 1 of 1

(Truck) Top Removal Process

Posted: May 18th, 2015, 11:22 am
by TrueDink
First hang the block and tackle and make sure the chains are out of the way.

Image

Reverse the truck in making sure it's central.

Image

Feed the ratchet straps through the windows at the correct points for weight distribution and hook them on the block and tackle. This can be tricky and sometimes takes a couple of adjustments.

Image

Image

Remove the six J clamps.

Image

Don't forget to disconnect the electrics and secure them out of the way.

Image

Lift the top up and off the truck and drive the truck out.

Image

Take the trailer out from underneath the camper and put it under the suspended top.

Image

Drop the top onto the trailer and store.

Image

This usually takes me about 20 minutes.

Image
hebergeur dimage

Re: Top Removal Process

Posted: May 22nd, 2015, 8:52 pm
by richc
Lisa would use it as a mini poly tunnel

rich

Re: (Truck) Top Removal Process

Posted: July 26th, 2015, 8:39 pm
by MizRaff
That's so clear and easy! Thanks a million, I will set something up so I can do this with the terrifically heavy Leer truck top we have on our F250 pickup.