Mattress support question?

Anything and everything thing here
join a thread/start a thread

Mattress support question?

Postby mjb666 » April 27th, 2018, 8:20 pm

Image

I spotted this on one of the De-mountables For Sale and wondered if any Forum Members have/use such a thing and ,if so, where can you buy one?

Mike
2005 Mitsubishi L200 Single Cab 4x2
Unknown Demountable
mjb666
 
Posts: 545
Joined: August 23rd, 2014, 5:07 pm
Location: Surrey. M3-Junction 4.

Re: Mattress support question?

Postby zildjian » April 27th, 2018, 8:55 pm

Identical to SKarosser actually, I don't know if they appear elsewhere but they work very well if you could get one made up
User avatar
zildjian
Site Admin
 
Posts: 11427
Joined: September 8th, 2013, 3:30 pm
Location: Tooooo far from the coast!

Re: Mattress support question?

Postby zildjian » April 27th, 2018, 9:25 pm

sk007_-_roll_out_bed_slats_kit_for_500-915mm.jpg

This lot do them at a reasonable price I thought (Harrow Middx)

Couple of these side by side

https://www.thebedslatscompany.co.uk/53 ... sembly-set
User avatar
zildjian
Site Admin
 
Posts: 11427
Joined: September 8th, 2013, 3:30 pm
Location: Tooooo far from the coast!

Re: Mattress support question?

Postby zildjian » April 28th, 2018, 6:48 am

Screen Shot 2018-04-28 at 06.46.16.png


I can't see a double off the shelf but says here they'd make whatever you like, Mark might need one of these for his self-build too
User avatar
zildjian
Site Admin
 
Posts: 11427
Joined: September 8th, 2013, 3:30 pm
Location: Tooooo far from the coast!

Re: Mattress support question?

Postby mjb666 » April 28th, 2018, 9:00 am

Thanks for that. I will measure up the bed area in the luton and get a quote.

Mike
2005 Mitsubishi L200 Single Cab 4x2
Unknown Demountable
mjb666
 
Posts: 545
Joined: August 23rd, 2014, 5:07 pm
Location: Surrey. M3-Junction 4.

Re: Mattress support question?

Postby mjb666 » May 23rd, 2018, 8:16 pm

I have measured the base area in my luton and then gone onto their website to get a bespoke quote but on looking closely, what they offer really isn't the same as what i want.

The mattress will only be 15mm above the base, i'm not keen on trying to add my own risers.

So it's a non-starter for me.

I will keep looking but Thanks for the initial link.

Mike
2005 Mitsubishi L200 Single Cab 4x2
Unknown Demountable
mjb666
 
Posts: 545
Joined: August 23rd, 2014, 5:07 pm
Location: Surrey. M3-Junction 4.

Re: Mattress support question?

Postby Alexd » May 26th, 2018, 3:58 pm

Screen Shot 2018-05-26 at 15.56.51.png

Mate bought this (to use on his boat) but says caravans etc too http://www.shipshapecaravans.co.uk/dry-mat.php
User avatar
Alexd
 
Posts: 1083
Joined: October 20th, 2015, 9:44 pm
Location: home again home again!

Re: Mattress support question?

Postby mjb666 » July 11th, 2018, 4:10 pm

I found this review on the Dry-mat system that Alexd suggested.

"How to improve a motorhome's bed in one easy step"

https://www.outandaboutlive.co.uk/motor ... -easy-step
2005 Mitsubishi L200 Single Cab 4x2
Unknown Demountable
mjb666
 
Posts: 545
Joined: August 23rd, 2014, 5:07 pm
Location: Surrey. M3-Junction 4.

Re: Mattress support question?

Postby wonkywheel » August 26th, 2018, 7:54 pm

zildjian wrote:
Screen Shot 2018-04-28 at 06.46.16.png


I can't see a double off the shelf but says here they'd make whatever you like, Mark might need one of these for his self-build too


Already looked at these. Might give them a go :)
https://www.ikea.com/gb/en/products/mat ... bed-bases/
"Success consists of going from failure to failure without loss of enthusiasm" .......(Winston Churchill)

2007 Ford Ranger "Thunder" 4x4
Camper aedificavit domum
User avatar
wonkywheel
 
Posts: 257
Joined: June 5th, 2017, 7:31 pm
Location: East Northamptonshire

Re: Mattress support question?

Postby TheWalshyWay » September 27th, 2018, 6:49 pm

Anyone purchased and used this "Drymat" underlay item?

B.
TheWalshyWay
 
Posts: 43
Joined: October 5th, 2017, 10:01 am


Return to Chitter chatter happens here

Who is online

Users browsing this forum: Exabot [Bot] and 37 guests

cron