Re: SKarosser Copy Scratch Home build?????
Posted: January 14th, 2019, 7:58 pm
Still working around replacing screws with rivets. Zildjian's lazy tong rivet gun is so much easier although using it in difficult to reach places (Across the roof) you have to watch your fingers It can have quite a nip.
So far all the roof corner are sorted and sealed along with the 20 running lights (7 white to the front, 5 red at the rear and 4 ambers on each side)
The small roof light in the toilet has been sealed in place. A battery box/step up made and the table fitted in position with a slider rail. An adjustable leg for the table is high on the agenda.
I will take and post more photo's soon but at the minute the inside is a right tip and I need to use my wide angle lens on the camera for that.
When the weather or fatigue have beaten me I have been playing with the drawing package on the computer. I still am fighting against having just a white box.
I have noted though that an all-white camper skin stays incredibly cool in the summer, even in the hottest sun. But, also, the winter sun does not melt the ice off the sides or roof. You can't have it both ways or can you.
Hoping to do a bit of wild camping, this might just fit the bill
I will be talking to my local wrapper ( not a musician ) to see if he can match the white, grey and black and give me a few tips.
Probably "DON'T DO IT"
But I like the idea of it being a bit individual but would prefer to do it myself rather than pay him to do it. I've done everything else myself and feel it would dent my personal pride, and pocket, to have him do it for me.
It won't be so bad then if I decide to strip it off or change it.
So far all the roof corner are sorted and sealed along with the 20 running lights (7 white to the front, 5 red at the rear and 4 ambers on each side)
The small roof light in the toilet has been sealed in place. A battery box/step up made and the table fitted in position with a slider rail. An adjustable leg for the table is high on the agenda.
I will take and post more photo's soon but at the minute the inside is a right tip and I need to use my wide angle lens on the camera for that.
When the weather or fatigue have beaten me I have been playing with the drawing package on the computer. I still am fighting against having just a white box.
I have noted though that an all-white camper skin stays incredibly cool in the summer, even in the hottest sun. But, also, the winter sun does not melt the ice off the sides or roof. You can't have it both ways or can you.
Hoping to do a bit of wild camping, this might just fit the bill
I will be talking to my local wrapper ( not a musician ) to see if he can match the white, grey and black and give me a few tips.
Probably "DON'T DO IT"
But I like the idea of it being a bit individual but would prefer to do it myself rather than pay him to do it. I've done everything else myself and feel it would dent my personal pride, and pocket, to have him do it for me.
It won't be so bad then if I decide to strip it off or change it.